Tiles Wall Stickers

Renovation involves intensive work and riot. If your old tiles no longer match your decor, you probably consider the option to remove them but remember that all the mess may cause once converted.

However, there are methods that can relieve your headache and have a easy upgrade that wall of old ceramic tiles. The following guide on these methods that the webpage prepared for you:

 1 paint tile

The first step for you choose to paint the old tiles is to do a thorough cleaning on existing surfaces. Eliminate all traces of dirt, grease and mildew.  Allow to dry for 24 hours.

The paint used should be suitable for tile itself. Prepare it by following the manufacturer’s recommendations and give the first coat. If you are painting with a roller, take care not to get grouts with paint compared with the center of the tiles.

Between the first and second coat is recommended to use a fine sandpaper to smooth gliding surface. Clean dirt with a dry cloth.

Inside the bathroom the paint should be restricted to the area outside the box, because of the humidity. The painting can be made with epoxy, which has a good adhesion.

2 tile on tile

Many people do not recommend laying tiles on tiles, but in fact you can do it. Before you start the process you need to check a few things: Look for loose, braised and broken unglued parts.

As the tiles will be the basis for another coating layer, it is necessary that the wall is in good condition without leaks and seepage, for example. Cleaning this base also is required as well as the removal of layers of resins and waxes. Now that you have checked the condition of the existing wall, it’s time to purchase the products.

Specific mortars are needed for this type of settlement. Often called mortar floor on floor, this material is recommended for laying ceramic tiles, porcelain tiles and slates with formats up to 45 x 45 cm.

This method has a disadvantage that it is the loss of space because the walls receive another mortar layer plus coating. Doors, windows, sockets and water outlet points should be adjusted according to the new dimensions.

3 mortar on tiles

This option eliminates the time to get rid of any ceramic track, leaving a clean wall. The process is a bit more complex and it also begins with the assurance that the parts are secure and that there are no infiltration.

Clean the ceramic as described in previous processes and first apply a coat of phosphatization background. As some mortars do not adhere to the surface of tiles, use acrylic mixed mortar in the process.

Three layers are necessary and it is necessary to sand the wall and every coat and leave to dry. Time to paint the new surface, prefer the acrylic satin or semigloss, which are more resistant and easy to clean.

4 Sticker of tiles

For this technique to renew the old tiles, the webpage prepared an exclusive guide to help you in a practical way.

Tags: cover tiles, paint tiles, mortar, sticker